1x Acrylic Box Packaging with Serial Number & Authenticity Sticker
1x Instruction Card
The iTaste MVP 20W is the new and improved version of the iTaste MVP 2.0. Made from stainless steel this new device from Innokin has been upgraded with an improved chip capable of up to a 20 watt output. It also has a new sleeker look and the ego/510 connection has been replaced with a flush 510 connection with spring-loaded contact pin.
The iTaste MVP 20W uses an improved 32-bit ARM microprocessor which provides users with an amazing vaping experience. It also has a steady VDC power output with a voltage accuracy of 1%, this not only reduces noise and improves reliability it also increases the life span of your battery. You can adjust the output voltage on the iTaste MVP 20W from 3.3 to 7.5 volts in 0.1 volt increments and the wattage can be adjusted from 6.0 to 20.0 watts in 0.5 watt increments.
The large 2600mah battery will ensure long-lasting power and can also be used as a portable power bank that can charge other electronics via the USB output. The MVP 20W is a high quality durable box mod with smarter, more powerful technology.
Variable Voltage: 3.3 – 7.5 volts in .1 volt increments
Variable Wattage: 6.0 – 20.0 watts in .5 watt increments
Max Current Output: 6 Amps
Minimum Atomizer Resistance: 1.0 ohm
Blue LED Display: Shows resistance, wattage, voltage, etc
Memory: Last set voltage/wattage when power turned off
2600mah Battery: Polymer Li-ion rechargeable
Ohm meter: Reads resistance of your atomizer/clearomizer/tank
Battery Level: 3 color (high, med, low) indicator of battery
Portable Power Source: Can charge other electronics via usb
Connection: eGo and 510
Short Circuit: Shuts down until short is corrected
Over-Discharge: Shuts down before battery drains below 3.4v